Sixth, Completed Pinewood Lights Circuit Board

Completely Assembled Pinewood Light Circuit Board

The completed circuit board should look like the drawings above. Place it alone (to avoid short circuits) in a plastic bag or paper envelope until after you have installed the lights in your Pinewood car and are ready to make the final connections. Save the left-over copper foil tape in a separate place, you will need it to connect the lights and may need it to replace the battery.

DO NOT save the tape, screws or other metal objects in contact with the completed circuit board or you may accidentally create a short circuit and run down the battery.

Click on Installation when you are ready to begin work on your Pinewood car.